Tag Archives: kessenich

Update on Loom Holdings

Quite awhile ago, in fact nearly three years ago, I posted what I thought was an impressive list of all the little weaving and knitting looms I had accumulated up to that time. It was just about then I started becoming interested in weaving, and I was making a pretty clear switch from knitting to weaving. I still do an occasional knitting project, but most of my time is spent in weaving world. So, maybe it's time for an updated list? I think it's interesting that all of the looms from my old list could have probably been stored in one medium-sized plastic bin, but I still thought it was excessive.

Then:

  • The Knifty Knitter round loom set (four looms)
  • The Knifty Knitter flower loom and spool knitter (two looms)
  • The purple Knifty Knitter rectangle loom
  • Five 4" Square Looms: Two 4" Weave-its, One 4" Simplex loom, One 4" Hazel Rose Multiloom, One 4" Wonder Weave
  • One Weave-it Rug loom
  • One Regular Gauge hat loom
  • One 24" Homestead Hideaway triangle loom
  • Two potholder looms
  • One extra fine gauge DecorAccents oval sock loom
  • Three small flower looms

Now… (I've kept every one of those, plus added a few.)

  • Glimakra Emilia rigid heddle loom 18" (with stand, extra heddles, etc.)
  • Erica 25" rigid heddle loom
  • Kessenich 14" two harness table loom
  • Peacock 12" two harness table loom
  • Louet W30 12" eight harness table loom
  • Ashford 16" four harness table loom
  • Soon-to-arrive 7' modular triloom
  • Schacht inkle loom
  • A teeny tiny wooden rigid heddle loom called a Samuel Gabriel loom
  • Two more Weave-Its. (Why stop? They jump into my hands at antique stores.)
  • Two Authentic Knitting Boards (10" and 28") plus the extenders for weaving
  • Another Wonder Weave ($5! I bet you couldn't resist, either.)
  • A 1940's blue plastic EZEE Knitter fine gauge loom
  • A homemade wooden knitting rake
  • A homemade round hat knitting loom
  • A couple more daisy wheel flower looms
  • A backstrap loom, made by me (For the record, this is the only loom I actually made that works, and yes, it's essentially four sticks and some yarn.)

Okay, we've gone way past the medium plastic bin storage idea!

For some reason–and not just because I'm running out of room in my tiny 8'x9' office–with the recent purchase of the 7' triloom, I feel I've actually come full circle. The first looms I had an interest in were the 4" square looms and the little Wonder Weave rigid heddle loom. I then bought my first triloom. Little did I know that those simple looms would teach me the basics of weaving. From there, I let things slide, weaving-wise, until the next fall, about a year later, when I suddenly had an urge to buy a "real" loom. But first, with my inquisitive nature and with some helpful words from a Ravelry weaver, along with Laverne's fantastic series on backstrap weaving at Weavezine, I put together a backstrap loom (and chiseled my hand in the process!), and figured out lifting patterns for plain weave, weft-faced projects. It was about five months later that I bought the Emilia loom.

My looms, every one, are still portable and small enough to fold up and store on a shelf or under the desk. So, my little saying on the top of my blog, "weaving and knitting on small looms," still holds water. (Do I sound a little defiant?) And yet, I think I really started weaving because I wanted to follow the fibers visually and figure out how structure was created. If you've ever seen a triloom, you'll know the weaver walks the yarn from side to side, hooking it onto opposing nails and weaving over and under the horizontal threads that are created in the process. It's called continuous weave, where the warp and weft are woven at the same time. It's not fine weaving with silken threads, but it suits me. (And if I want to use silken threads, well, I just fire up the little Louet W30!!)

With all that said, I have two looms in the mix that will probably need new homes, the Peacock and the Kessenich. Both also need some work, but I'll post more about that in the future if I decide to wave goodbye.

Plarn Tote

 

  • image from www.flickr.com
  • image from www.flickr.com
  • image from www.flickr.com
  • image from www.flickr.com
  • image from www.flickr.com
image from www.flickr.com

Plarn = plastic bags cut into strips and used as yarn. Plarn is fun, and it's green!

I used the 10 dent heddle on the Kessenich two-harness loom, warping every other slot–70 ends total –with white crochet cotton for the warp, bought for a quarter at a thrift store. I probably used about ten cents worth. Then, I cut ten plastic sacks into strips, using a tutorial I viewed on Youtube. The red handle is some acrylic I spool knitted on a little crank knitter. So, all in all, my weaving cost me about fifty cents. Ritzy!

I wove 20 inches but now wish I would have taken the time for another five to ten, because although this little tote is cute, it's not really useful. It's probably just big enough for a few DVDs or one or two books. I don't plan on lining it, but I am planning on another plarn tote, this time bigger.

Table Loom O-Rama

I've scanned thrift and antique stores for over a year searching for looms. I've found Weave-Its, a Wonder Weave (4" loom), and different types of knitting looms. I've spotted a few floor looms, mostly huge and needing a tremendous amount of work. What I haven't seen has been a tabletop loom. Until yesterday.

 I found not one but two tabletop looms within a half an hour! And maybe I didn't get the most tremendous deals, but I was kind of like a kid in a candy store who has a credit card and a very strong desire to buy a lot of candy! Okay, bad comparison aside, I bought them both. And in my tremendous daze of Loom Craziness, I walked out of one of the stores without the reed. I called the antique shop owner when I got home (the store was hours away from where I live), and she said she'd mail it to me ASAP.

 

  • image from www.flickr.com
  • image from www.flickr.com
  • image from www.flickr.com
  • image from www.flickr.com
  • image from www.flickr.com
image from www.flickr.com

 

 

So, what kind of looms did I end up with? I can identify one of them so far: A 12" two harness Peacock Loom, by Handcrafters from Waupun, Wisconsin. These are no longer made, but they're very cute. Mine had a tag on it that said it was from a junior high school in Illinois, and it shows a lot of use. Nothing is broken or missing, but gee… I'll be teaching myself how to make string heddles within the next few days because every one of them has disintegrated. However, the reed is free of rust and everything else looks very nice. This was the first loom I spotted, and at that time the $75 seemed excessive but I rationalized it with a "But I never see these types of looms for sale and I'll probably not ever see one again." Bought it!

 

 

  • image from www.flickr.com
  • image from www.flickr.com
  • image from www.flickr.com
  • image from www.flickr.com
  • image from www.flickr.com
image from www.flickr.com

 

 

And about 20 minutes later, I walked into a second antique store to find this, another two harness tabletop loom. This is much bigger, with a weaving width of 14". It's oak, extremely well made and sturdy, and I'm starting to think it's a Kessenich loom because it resembles the pictures of four harness looms I've spotted. Compared to the little Peacock loom, this one really looks like it's ready to be used. The heddles are metal and free of rust. I remember the reed also being usable, but we'll see when it arrives.  (Can you imagine the adrenaline rush I had when I got home and took it out of the car, only to search frantically for the reed? Ah well… I'll never leave a store again without double-checking the bits and pieces of a loom I've just purchased.) It also came with a second reed, I believe an 8 dent.

Speaking of purchase price, this one was listed at $125. Again, was it a deal? I hope so. It needs a little bit of cleaning, two tiny dowel replacements where the reed rests, and it's ready to warp. It does have an extra two dowels looped through a cord and fastened on either side near the top. I don't know what the purpose of this is.

Speaking of warping, I don't know how these looms will differ from my rigid heddle loom, how to use the string/metal heddles versus the rigid heddle, how much warp they can hold, etc. I have lots of questions, but the biggest question I have (and my husband, too) is where in the world will I put them?